我们的网站为什么显示成这样?

可能因为您的浏览器不支持样式,您可以更新您的浏览器到最新版本,以获取对此功能的支持,访问下面的网站,获取关于浏览器的信息:

|Table of Contents|

柔化辊旋切参数对旋切单板质量的影响(英文)(PDF)

《南京林业大学学报(自然科学版)》[ISSN:1000-2006/CN:32-1161/S]

Issue:
2003年05期
Page:
1-5
Column:
研究论文
publishdate:
1900-01-01

Article Info:/Info

Title:
Effect of Veneer Peeling Parameters with an Incisor Bar on Veneer Quality
Article ID:
1000-2006(2003)05-0001-05
Author(s):
JIANG Shenxue1 DAI Chunping2 WANG Jianhe2
1.Nanjing Forestry University,Nanjing 210037,China;2.Forintek Canada Corp.Vancouver,B.C.Canada
Keywords:
Incisor barPeeling parameter settingsVeneer thickness variationVeneer curl-upVeneer incising
Classification number :
TH132;TS653
DOI:
10.3969/j.jssn.1000-2006.2003.05.001
Document Code:
A
Abstract:
An incisor bar and control system were installed on a minilathe to investigate the effects of incising veneer on veneer quality.Three controllable variables,i.e.knife pitch angle(PA),vertical gap(VG) and horizontal gap(HG) with three level configurations were examined and compared.Each peeling setting of combination of three variables was repeated twice.Green and dry veneer thickness variation,green veneer curlup,and dried veneer roughness were the veneer quality indicators estimating whether a peeling setting was superior to another.The result showed that the best pitch angle should be 90.5°,suitable vertical gap was 9.84 mm,and the best horizontal gap was 2.79 mm for the rotary peeling with an incisor bar used in this experiment.

References

-

Last Update: 1900-01-01