我们的网站为什么显示成这样?

可能因为您的浏览器不支持样式,您可以更新您的浏览器到最新版本,以获取对此功能的支持,访问下面的网站,获取关于浏览器的信息:

|Table of Contents|

微波等离子体处理对竹材表面接触角的影响

《南京林业大学学报(自然科学版)》[ISSN:1000-2006/CN:32-1161/S]

Issue:
2007年04期
Page:
33-36
Column:
研究论文
publishdate:
2007-04-20

Article Info:/Info

Title:
Influence of Surface Performance on Bamboo Timber by Microwave Plasma Treatment
Article ID:
1000-2006(2007)04-0033-04
Author(s):
DU Guan-ben1 SUN Zhao-bin2 HUANG Lin rong1
1. Faculty of Wood Science and Interior Decoration Southwest Forestry College, Kunming 650224, China; 2. Forestry College Agricultural University of Hebei, Baoding 071000, China
Keywords:
Microwave plasma Bamboo timber Surface treatment Contact angle
Classification number :
S785
DOI:
10.3969/j.jssn.1000-2006.2007.04.007
Document Code:
A
Abstract:
The surface treatment of bamboo timber was carried out by microwave plasma (MWP). The surface contact angle of samples was measured by using glycerin and UFR. Hence the influence on the surface performance of bamboo sample was evaluated. The results showed that the surface contact angle of samples became the decreasing trend as a whole with prolonging the MWP treat time and the distances shorting between the sample and resonance cavity. The surface contact angle of sample descend 49%~59% with MWP treating 30s, when the distances between the sample and resonance cavity were 40mm and measured at 15s after dripping with glycerin. The surface contact angle of samples was lower measured with the glycerin than that of UFR, also at 15s after dripping than that of 5s after dripping whether it was glycerin or UFR. The grinding treatment had a little effect on the surface contact angle of samples after MWP treatment. The modification effect was better treated by MWP treating after grinding than that of treating by MWP directly.

References

-

Last Update: 2013-05-20