我们的网站为什么显示成这样?

可能因为您的浏览器不支持样式,您可以更新您的浏览器到最新版本,以获取对此功能的支持,访问下面的网站,获取关于浏览器的信息:

|Table of Contents|

不同端压下杨木指接质量的分析(PDF)

《南京林业大学学报(自然科学版)》[ISSN:1000-2006/CN:32-1161/S]

Issue:
2013年03期
Page:
92-96
Column:
研究论文
publishdate:
2013-05-20

Article Info:/Info

Title:
Effects of end pressures on the finger-joint quality of poplar wood
Author(s):
LIU Jin LUO Hai WANG Naiwen LU Xiaoning*
College of Wood Science and Technology, Nanjing Forestry University, Nanjing 210037, China
Keywords:
fast-growing poplar finger-joint end pressure mechanical properties microscopic analysis
Classification number :
S781
DOI:
10.3969/j.issn.1000-2006.2013.03.017
Document Code:
-
Abstract:
Finger-joint quality is one of the key factors to the performance of wood products. The aim of this research was to evaluate the effect of end pressure on the quality of finger-joint of poplar and find the best end pressure by mechanical property test and microscopic analysis. The theoretical range of end pressure was firstly determined by examining load-displacement curves, and then five end pressure levels ranging from 3.0 MPa to 16.5 MPa were investigated based on the the theoretical range of end pressure. Test results showed that the end pressure did not affect on the modulus of elasticity. However, the effects on the modulus of rupture and tensile strength were significant. When the pressure was lower than critical pressure Pmin, finger tip could not contact with finger root completely. Meanwhile, the crush and crack of joints increased markedly as the pressure exceeded 7.6 MPa. Both of the two situations were unable to obtain the best finger joint strength. It can be observed that the best end pressure for finger jointed poplar is about 7.0 MPa in this experiment, which is about 20% of the compressive strength of the material.

References

[1] Ratnasingam J, Scholz F. Optimization of finger-jointing in rubberwood processing [J]. Eur J Wood Prod, 2009, 67:241-242.
[2] Hoyle Jr R J, Strickler M D, Adams R D A. Finger-joint connected(FJC)wood truss system [J]. Forest Prod J, 1973, 23(8):17-26.
[3] Serrano E, Gustafsson P J, Larsen H J. Modeling of finger-joint failure in glued-laminated timber beams [J]. Struct Eng-ASCE, 2001, 127(8):914-921.
[4] Karastergiou S, Barboutis J, Vassiliou V. Effect of the PVA gluing on bending strength properties of finger jointed turkey oakwood(Quercus cerris L.)[J]. Holz Als Roh-und Werkst, 2006, 64:339-340.
[5] 林兰英, 傅峰. 指接材研究现状与进展 [J]. 木材工业, 2007, 21(4):5-8. Lin L Y, Fu F. Research status and developing trends of finger-jointed lumber [J]. China Wood Industry, 2007, 21(4):5-8.
[6] Biblis E J, Carino H F. Factors influencing the flexural properties of finger-jointed southern pine LVL [J]. Forest Prod J, 1993, 43(1):41-46.
[7] Bustos C, Mohammad M, Hern ndez R E, et al. Effects of curing time and end-pressure on the tensile strength of finger-joined black spruce lumber [J]. Forest Prod J, 2003, 53(11-12):85-89.
[8] Ayarkwa J, Hirashima Y, Sasaki Y. Effect of finger geometry and end pressure on the flexural properties of finger jointed tropical African hardwoods [J]. Forest Prod J, 2000, 50(11/12):53-63.
[9] Ozcifci A, Yapici F. Structural performance of the finger-jointed strength of some wood species with different joint configurations [J]. Constr Build Mater, 2008, 22(7):1543-1550.
[10] Jokerst R W. Finger-jointed wood products [R/OL]. Madison:USDA Forest Service, 1981.(2012-10-01)http:∥fpl.fs.us/documnts/fplrp382.pdf.
[11] Groom L H, Leitchi R J. Effect of adhesive stiffness and thickness on stress distributions in structural finger joints [J]. J Adhesion, 1994, 44(1-2):69-83.
[12] Bryan H R. Fracture of adhesive-bonded wood joints [G]∥Pizzi A, Mittal K L. Handbook of Adhesive Technology. NewYork:Marcel Dekker Inc, 1994.
[13] 林兰英, 傅峰. 短榫指接端压和嵌合度参数分析 [J]. 北京林业大学学报, 2008, 30(2):138-142. Lin L Y, Fu F. Endpressure and fitness ratio for mini-finger jointing [J]. Journal of Beijing Forestry University, 2008, 30(2):138-142.
[14] Bustos C, Hernandez R E, Beauregard R, et al. Effects of end-pressure on the finger-joint quality of black spruce lumber:a microscopic analysis [J]. Maderas-Cienc Tecnol, 2011, 13(3):319-328.
[15] 方升佐. 中国杨木人工林培育技术研究进展 [J]. 应用生态学报, 2008, 19(10):2308-2316. Fang S Z. Silviculture of poplar plantation in China:a review[J]. Chinese Journal of Applied Ecology, 2008, 19(10):2308-2316.

Last Update: 2013-05-31