我们的网站为什么显示成这样?

可能因为您的浏览器不支持样式,您可以更新您的浏览器到最新版本,以获取对此功能的支持,访问下面的网站,获取关于浏览器的信息:

|Table of Contents|

常压冷等离子体处理改善杨木单板胶合特性的研究(PDF)

《南京林业大学学报(自然科学版)》[ISSN:1000-2006/CN:32-1161/S]

Issue:
2013年05期
Page:
169-171
Column:
研究简报
publishdate:
2013-09-30

Article Info:/Info

Title:
Improvement bondability of poplar veneers by atmospheric pressure plasma discharge treatment
Article ID:
1000-2006(2013)05-0169-03
Author(s):
ZHANG Rong ZHOU Xiaoyan* TANG Lijuan YANG Xuehui CHEN Zhao ZHOU Ping
College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
Keywords:
atmospheric pressure plasmadielectric barrier dischargepoplar veneerbonding strength
Classification number :
TS653
DOI:
10.3969/j.issn.1000-2006.2013.05.033
Document Code:
A
Abstract:
The improvement bondability of poplar veneers by atmospheric pressure dielectric barrier discharge (DBD) treatment was investigated in this paper. The effect of processing power, treatment rate and treatment times on the bonding strength of plywood were evaluated. The results showed that the treatment could improve the veneer bonding strength remarkably. The improved rate of bonding strength ranged 10%-40%. Optimized processing conditions were as follows:processing power 4.5 kW, treatment rate 14 m/min and the treatment times 1.

References

[1]康树萱,李春虹.关于杨木改性的设想[J].辽宁林业科技,2002(4):27-28. Kang S X,Li C H. The idea on poplar modification[J].Journal of Liaoning Forestry Science & Technology,2002(4):27-28.
[2]章蓉,汤丽娟,许娟,等.氧冷等离子体处理条件对杨木胶合强度的影响[OL].中国科技论文在线,2010(09).http://www.paper.edu.cn/releasepaper/content/201009-31. Zhang R,Tang L J,Xu J,et al. The Effect of oxygen cold plasma treatment on bonding strength of hybrid poplar veneers[OL].Sciencepaper Online,2010(09). http://www.paper.edu.cn/releasepaper/content/201009-31.
[3]汤丽娟,章蓉,周晓燕,等.氧冷等离子体处理对饰面中密度纤维板甲醛释放量的影响[J].南京林业大学学报:自然科学版,2011,35(2):69-72. Tang L J,Zhang R,Zhou X Y,et al.Effect of O2-cold plasma treatment on formaldehyde emission from overlaying MDF[J].Journal of Nanjing Forestry University:Natural Sciences Edition,2011,35(2):69-72.
[4]杨喜昆,杜官本,钱天才,等.木材表面改性的XPS分析[J].分析测试学报,2003.22(4):5-8. Yang X K,Du G B,Qian T C,et al.Analysis of the surface modification of wood by xray photoelectron spectroscopy[J]. Journal of Instrumental Analysis, 2003,22(4):5-8.
[5]Woo S K,HyunSu K,Sang H H.Atomic oxygen generation by insitu plasma and postplasma in dielectric barrier discharges for surface treatment[J].Thin Solid Films,2010,518(4):6578-6582.
[6]杜官本,华毓坤,王真.微波等离子体处理对杉木表面性能的影响[J].木材工业,1998,12(6):17-20 Du G B,Hua Y K,Wang Z.Surface performance of chinese fir wood treated by microwave plasma[J]. China Wood Industry,1998,12(6):17-20
[7]杜官本,华毓坤,王真,等.木材表面微波等离子体处理[C]//木材胶粘剂及人造板表面加工学术讨论会论文集.上海:中国林学会,1999.
[8]黄河浪,赵 明,董丽君,等.低温冷等离子体对不同含水率杨木单板表面改性的初步研究[J].林产工业,2010,37(3):20-22. Huang H L,Zhao M,Dong L J,et al.The preliminary study on surface modification of hybrid poplar veneers with different moisture contents using cold plasma treatment[J].China Wood Industry, 2010,37(3):20-22.
[9]黄河浪,卢晓宁,薛丽丹,等.用氧等离子体处理改善竹地板胶合性能[J].浙江林学院学报,2006,23(5):486-490. Huang H L,Lu X N,Xue L D,et al.Bonding performance of bamboo plywood improved by O2 plasma treatment[J].Journal of Zhejiang Forestry College,2006,23(5):486-490.
[10]Georg A,Gunthard S,Evelyn N,et al.Improved bondability of waxtreated wood following plasma treatment[J].Wood Science Technology,2011,45:358-368.
[11]Avramidis G, Nothnick E, Militz H,et al.Accelerated curing of PVAc adhesive on plasmatreated wood veneers[J].European Journal of Wood and Wood Products,2011,69(2):329-332.
[12]中国林业科学研究院木材工业研究所.GB/T 9846.3—2004 普通胶合板通用技术条件[S].北京:中国标准出版社,2004.
[13]Jamali A, Evans P D.Etching of wood surfaces by glow discharge plasma[J].Wood Science Technology,2011,45:169-182.
[14]孙文专,田俊莹,黄 侃.微波低温等离子体处理羊绒染色性能的影响[J].染整技术,2010,32(2):6-8. Sun W Z,Tian J Y,Huang K.Effect of microwave cold plasma treatment on the dyeing properties of cashmere[J].Textile Dying and Finishing Journal,2010,32(2):6-8.
[15]Wolkenhauer A, Avramidis G, Cai Y, et al.Investigation of wood and timber surface modification by dielectric barrier discharge at atmospheric pressure[J].Plasma Processes and Polymers,2007,(4):470-474.
[16]Jia C X, Chen P, Li B,et al. Effects of Twaron fiber surface treatment by air dielectric barrier discharge plasma on the interfacial adhesion in fiber reinforced composites[J]. Surface & Coatings Technology,2010,204:3668-3675.
[17]Sun J,Wang C X,Yao L,et al. ESR study on fibers treated with atmospheric dielectric barrier discharge plasma[J].Journal of Xi′an Polytechnic University,2009,23(2):262-264.

Last Update: 2013-09-30