为提高木质复合材料可设计性，根据经典层合理论，建立层合结构木质复合材料湿变形计算模型。以不对称结构的胶合板湿变形为例，考虑到单板压缩率、涂胶量等工艺对单板湿胀系数和弹性性能，以及含水率对单板弹性性能的影响，计算得到翘曲湿变形理论值。同时对不同结构胶合板进行等温增湿实验，并对模型进行验证。结果表明，所建湿变形计算模型能正确判断胶合板翘曲变形方向。
Abstract
To increase the designability of wood composites, the model of laminated wood composite hygroscopic deformation was built based on classical laminated plate theory (CLPT) in this paper. Take asymmetric plywood for example, the theory value of warping hygroscopic deformation was simulated considering the effect of veneer compression ratio and glue spreading on veneer line expansion coefficients and elastic properties, and the effect of moisture content on veneer elastic properties. The model was validated by measuring the warping of different structures plywood, which were treated under in the environment of invariable temperature and increasing humidity. The results showed the model could judge the warping direction of plywood rightly, and calculate hygroscopic deformation quantificationally.
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1]Otto Suchaland. Linear hygroscopic expansion of selected commercial particleboards[J]. Forest Products Journal, 1972, 22(11): 28-32.
[2]沈观林. 复合材料力学[M]. 北京:清华大学出版社,1996.
[3]Cai Zhiyong. Evaluating the warping of laminated particleboard panels[C]//7th Pacific Rim BioBased Composites Symposium. Nanjing: Science & Technique Literature Press, 2004.
[4]Cai Zhiyong, James R Dickens. Wood composite warping: modeling and simulation[J]. Wood and Fiber Science, 2004, 36(2): 174-185.
[5]卢晓宁,陈宇聪,陈颖. 速生杨木单板顺纹弹性模量预测模型[J]. 南京林业大学学报:自然科学版,2002,26(3):9-13.
[6]卢晓宁,黄河浪,杜以诚. 速生杨木单板横纹弹性模量预测模型[J]. 南京林业大学学报:自然科学版,2003,27(2):21-24.
[7]卢晓宁,王志强,杜以诚,等. 速生杨木单板面内剪切模量预测模型[J]. 南京林业大学学报:自然科学版,2006,30(1):93-94.
[8]Forest Products Laboratory. WOOD Handbook: Wood as an Engineering Material[M]. Washington D C: Government Printing Office, 1999.
[9]WANG Zhiqiang, LU Xiaoning, XIONG Guobing. Effect of plywood technology on poplar veneer linear expansion coefficient[C]//Conference on Engineered Wood Products Based on Poplar/Willow Wood. Nanjing: Nanjing Forestry University, 2008.
[10][德]科尔曼F F P,[美]科泰W A. 木材学与木材工艺学原理—实体木材[M]. 北京:中国林业出版社,1991.
[11]王志强. 胶合板构成及湿变形机理研究[D]. 南京:南京林业大学,2007.
基金
收稿日期：2009-01-20修回日期：2009-09-01基金项目：浙江省重大科技攻关项目(2006C12071);扬州工业职业技术学院科研启动基金项目作者简介：王志强(1978—)，讲师，博士。*卢晓宁(通信作者)，教授。Email: luxiaoning@njfu.edu.cn。引文格式：王志强,卢晓宁,肖忠平. 胶合板湿变形预测模型[J]. 南京林业大学学报:自然科学版,2010,34(1):101-103.
