SiO2改性对紫外光固化木器涂料性能的影响

闫小星; 吴燕; 毛卫国; 徐伟

doi:10.3969/j.issn.1000-2006.2014.04.034

SiO₂改性对紫外光固化木器涂料性能的影响

闫小星,吴燕,毛卫国,徐伟

南京林业大学学报（自然科学版） ›› 2014, Vol. 38 ›› Issue (04) : 173-176.

PDF(1394472 KB)

国家林草科技领军期刊
中国精品科技期刊
中国高校百佳科技期刊
江苏省新闻出版政府奖期刊奖
RCCSE林学权威期刊（A+）
CSCD核心期刊
Scopus数据库收录期刊
中文核心期刊
SCD核心期刊

作者加群：102861116

微信公众号：南京林业大学学报

高级检索

PDF(1394472 KB)

南京林业大学学报（自然科学版） ›› 2014, Vol. 38 ›› Issue (04) : 173-176. DOI: 10.3969/j.issn.1000-2006.2014.04.034

研究简报

SiO₂改性对紫外光固化木器涂料性能的影响

闫小星,吴燕,毛卫国,徐伟

作者信息 +

Influence of modification of UV-curing wood coatings with SiO₂ on its mechanical properties and gloss

YAN Xiaoxing, WU Yan, MAO Weiguo, XU Wei

Author information +

文章历史 +

摘要

采用SiO₂对紫外光(UV)固化木器涂料进行改性,通过优化工艺参数制备了UV固化木器涂层。对涂层的力学性能(硬度、附着力和耐冲击强度)和光泽度进行了测试。结果表明:当SiO₂质量分数为0.66%～1.32%,干燥时间2 min,UV灯3盏时,UV固化木器涂层具有良好的硬度、附着力和冲击强度; 但是当SiO₂质量分数高于1.32%时,涂层的力学性能反而下降。光泽度检测结果表明,UV固化涂层的光泽度随SiO₂含量的升高而下降; 当SiO₂质量分数超过1.32%时,UV固化木器涂层呈现亚光光泽度。

Abstract

Influence of UV-curing wood coatings modification with SiO₂ on its mechanical properties and gloss was investigated in this paper. UV curing wood coatings were modified by SiO₂, and then the glossiness and mechanical properties including hardness, adhesion,resistance impact strength of film coating formed under the optimum modification conditions were tested. It was found that UV curing wood coatings had good hardness, adhesion and impact strength when the SiO₂ content was 0.66%-1.32%, the dry time was 2 min and UV lamp was 3, but the mechanical properties of coatings decreased and their glossiness displayed matt when the SiO₂ content was over 1.32%.

引用本文

EndNote

Ris (Procite)

Bibtex

导出引用

闫小星,吴燕,毛卫国,徐伟. SiO₂改性对紫外光固化木器涂料性能的影响[J]. 南京林业大学学报（自然科学版）. 2014, 38(04): 173-176 https://doi.org/10.3969/j.issn.1000-2006.2014.04.034

YAN Xiaoxing, WU Yan, MAO Weiguo, XU Wei. Influence of modification of UV-curing wood coatings with SiO₂ on its mechanical properties and gloss[J]. JOURNAL OF NANJING FORESTRY UNIVERSITY. 2014, 38(04): 173-176 https://doi.org/10.3969/j.issn.1000-2006.2014.04.034

中图分类号： TQ633

参考文献

[1] Sabani S, Onen A H, Gungor A. Preparation of hyperbranched polyester polyol-based urethane acrylates and applications on UV-curable wood coatings[J]. Journal of Coatings Technology and Research, 2012, 9(6): 703-716.
[2] 毛卫国,闫小星,吴燕,等. CaCO₃改性对UV固化木器涂料性能的影响[J]. 家具, 2013, 34(4): 26-29. Mao W G, Yan X X, Wu Y, et al. Performance of UV-curable wood coatings modified by CaCO₃[J]. Furniture, 2013, 34(4): 26-29.
[3] 彭钧浪,刘志刚,罗先平,等. 低气味UV光固化木器涂料的制备[J]. 中国涂料, 2012, 27(2): 46-48. Peng J L, Liu Z G, Luo X P, et al. Preparation of low odor UV-curable woodenware coatings[J]. China Coatings, 2012, 27(2): 46-48.
[4] 郑建鹏,张军. 影响聚氨酯亚光清漆涂膜光泽稳定性的因素[J]. 中国涂料, 2008, 23(1): 23-25. Zheng J P, Zhang J. Influencing factors of film gloss stability of semi-gloss PU varnish[J]. China Coatings, 2008, 23(1): 23-25.
[5] Jancovicova V, Mikula M, Havlinova B, et al.Influence of UV-curing conditions on polymerization kinetics and gloss of urethane acrylate coatings[J]. Progress in Organic Coatings, 2013, 76(2-3): 432-438.
[6] 林晓峰,曾春龙. 100% UV固化涂料的最佳消光效应[J]. 涂料工业, 2005, 35(10): 13-17. Lin X F, Zeng C L. The most effective matting technology for 100% UV-curing coatings[J]. Paint & Coating Industry, 2005, 35(10): 13-17.
[7] Bardi M A G, Machado L D B. Accompanying of parameters of color, gloss and hardness on polymeric films coated with pigmented inks cured by different radiation doses of ultraviolet light[J]. Radiation Physics and Chemistry, 2012, 81(9): 1332-1335.
[8] 朱海龙,吴玉章,孙伟圣. 三聚氰胺脲醛树脂胶黏剂的合成[J]. 南京林业大学学报:自然科学版, 2013, 37(1): 173-176. Zhu H L, Wu Y Z, Sun W S. Synthesis of melamine-urea-formaldehyde resin adhesive[J]. Journal of Nanjing Forestry University:Natural Sciences Edition, 2013, 37(1): 173-176.
[9] Landrya V, Riedl B, Blanchet P. Nanoclay dispersion effects on UV coatings curing[J]. Progress in Organic Coatings, 2008, 62(4): 400-408.
[10] 章芬成,杨建军,吴庆云,等. 纳米SiO₂改性醇溶性蓖麻油-聚氨酯树脂的制备与表征[J]. 精细化工,2012, 29(10): 1021-1025. Zhang F C, Yang J J, Wu Q Y, et al.Synthesis and characterization of alcohol-soluble polyurethane modified by castor oil and nano-SiO₂[J]. Fine Chemicals, 2012, 29(10): 1021-1025.
[11] 顾凯,周晓燕. 纳米二氧化钛/三聚氰胺树脂混合体系的特性[J]. 南京林业大学学报:自然科学版, 2010, 34(2): 65-68. Gu K, Zhou X Y. Characteristics of nano-sized TiO₂/melamine formaldehyde resin mixture[J]. Journal of Nanjing Forestry University:Natural Sciences Edition, 2010, 34(2): 65-68.
[12] 赖俊伟,杨建文,刘晓暄. 碳酸钙表面感光修饰及其在UV涂料中的应用[J]. 影像科学与光化学, 2013, 31(1): 10-17. Lai J W, Yang J W, Liu X X. Surface photosensitive modification of calcium carbonate and application in UV-curable coating[J]. Imaging Science and Photochemistry, 2013, 31(1): 10-17.
[13] 莫引优,陈奎,何其飞,等. 用二氧化硅聚氨酯涂料改良木材表面性质的研究[J]. 北京林业大学学报, 2012, 34(4): 154-159. Mo Y Y, Chen K, He Q F, et al. Modifying wood surface properties by SiO₂ polyurethane coating[J]. Journal of Beijing Forestry University, 2012, 34(4): 154-159.
[14] Mirabedini S M, Mohseni M, PazokiFard S, et al. Effect of TiO₂ on the mechanical and adhesion properties of RTV silicone elastomer coatings[J]. Colloids Surface A, 2008, 317(1-3): 80-86.
[15] Shum P W, Zhou Z F, Li K Y, et al. Mechanical and tribological properties of amorphous carbon films deposited on implanted steel substrates[J]. Thin Solid Films, 2004, 458(1-2): 203-211.
[16] 闫小星. 金属/聚氨酯红外低发射率复合涂层界面改性及性能研究 [D]. 南京: 南京航空航天大学, 2012. Yan X X. Interface modification and properties of metal/polyurethane infrared low emissivity composite coatings [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2012.

基金

收稿日期:2013-05-16 修回日期:2013-12-24
基金项目:江苏高校优势学科建设工程资助项目(PAPD); 教育部高等学校博士学科点专项科研基金项目(20123204120019); 国家自然科学基金项目(31100417)
第一作者:闫小星,讲师,博士。E-mail: yanxiaoxing@nuaa.edu.cn。
引文格式:闫小星,吴燕,毛卫国,等. SiO₂改性对紫外光固化木器涂料性能的影响[J]. 南京林业大学学报:自然科学版,2014,38(4):173-176.