[1] 岳金权, 李伟, 黄晓丽, 等. 挤压法生产杨木漂白化机浆[J]. 中国造纸, 2009,28(1): 53-57. Yue J Q, Li W, Huang X L, et al. Production of aspen bleached chemi-mechanical pulp by extrusion method[J]. China Pulp & Paper, 2009,28(1): 53-57. [2] 刘长恩, 岳金权. 动态挤压磨浆[J]. 中国造纸, 2003, 22(5): 23-26. Liu C E, Yue J Q. Refining with dynamic extruding process[J]. China Pulp & Paper, 2003, 22(5): 23-26. [3] 黄晓丽, 岳金权, 刘长恩, 等. 杨木挤压法漂白化机浆与APMP 化学组成的研究[J]. 纸和造纸, 2008, 27(5): 21-23. Huang X L, Yue J Q, Liu C E, et al. Study on chemical compositions of bleached extruder-chemi-mechanial pulp and APMP of aspen[J]. Paper and Paper Making, 2008, 27(5): 21-23. [4] 李伟, 岳金权, 刘长恩, 等. 杨木挤压法漂白化机浆成浆特性研究[J]. 中华纸业, 2008, 27(5): 21-23. Li W, Yue J Q, Liu C E, et al. A study on pulping characteristics of bleached extruder chemi-mechanical pulp of aspen[J]. China Pulp & Paper Industry, 2008, 27(5): 21-23. [5] 黄晓丽. 杨木挤压法漂白化机浆制浆过程研究[D]. 哈尔滨: 东北林业大学, 2010. Huang X L. Study on the process of aspen bleached extruder chemi-mechanical pulping[D]. Harbin: Northeast Forestry University, 2010. [6] 刘丽莎, 戴红旗, 王淑梅, 等. 细小纤维表面化学特性研究(Ⅰ):湿部pH值对细小纤维性能的影响[J]. 生物质化学工程, 2006, 40(5): 7-10. Liu L S, Dai H Q, Wang S M, et al. Study on surface chemistry characteristics of fines(Ⅰ):the effects of pH value in wet-end system on characteristics of fines[J]. Biomass Chemical Engineering, 2006, 40(5): 7-10. [7] Bhardwaj N K, Duong T D, Nfuyen K L. Pulp charge determination by different methods: effect of beating/refining[J]. Colloids and Surfaces A: Physicochem Eng Aspects, 2004, 236(1-3): 39-44. [8] 王旭, 詹怀宇, 赵光磊, 等. 新闻纸厂过程用水DCS的来源与清除[J]. 中国造纸, 2003, 22(7): 1-4. Wang X, Zhan H Y, Zhao G L, et al. Origins of DCS of newsprint mill’s process water and evaluation of DAF efficiency in DCS removal[J]. China Pulp & Paper, 2003, 22(7): 1-4. [9] 何志斌, 倪永浩, 周亚军. 高得率浆的特性及其对造纸过程湿部化学的影响[J]. 国际造纸, 2007, 26(3): 25-34. He Z B, Ni Y H, Zho Y J. Characteristics of high yield pulp and their effects on the wet-end chemistry of the papermaking process[J]. World Pulp and Paper, 2007, 26(3): 25-34. [10] Holmbom B, Ekman R, Sjoholm R, et al. Chemical-changes in peroxide bleaching of mechanical pulps[J]. Papier, 1991, 45(10A): 16-22. [11] Pan G X. An insight into the behaviour of aspen CTMP inperoxide bleaching[J]. Pulp & Paper Canada, 2001, 102(11): 41-45. [12] He Z, Qian X, Ni Y. The tensile strength of bleached mechanical pulps from the Mg(OH)2-based and NaOH-based peroxide bleaching processes[J]. Journal of Pulp and Paper Science, 2006, 32(1): 47-52. [13] 郭延柱, 傅英娟, 高继水, 等. 碱性 H2O2处理对杨木 P-RC APMP电荷特性的影响[J]. 中国造纸, 2010, 29(7): 5-10. Guo Y Z, Fu Y J,Gao J S, et al. Effect of alkaline peroxide treatment on the charge characteristics of aspen P-RC APMP[J]. China Pulp & Paper, 2010, 29(7): 5-10. [14] Pan G X. Relationship between dissolution of fiber materials and development of pulp strength in alkaline peroxide bleaching of mechanical pulp[J]. Holzforschung, 2004, 58(4): 369-375. [15] Thornton J, Ekman R, Holmbom B, et al. Release of potential anionic trash in peroxide bleaching of mechanical pulp[J]. Paperi Ja Puu, 1993, 75(6): 426-431. [16] Sundberg A, Pranovich A, Holmbom B. Distribution of anionic groups in TMP suspensions[J]. Journal of Wood Chemistry and Technology, 2000, 20(1): 71-92. [17] Hirro Tanaka, Agne Swerin. Transfer of cationic retention aid from fibers to fine partieles and cleavage of polymer chains under wet-end papermaking conditions[J]. Tappi J, 1993, 76(5): 157-163. [18] Glittenberg D, Hemmes J L, Bergh N O. Cationnic starches in system with high levels of anionic trash[J]. Paper Technology, 1994, 35(9): 18-22. [19] 黄光祥, 岳金权. 杨木挤压法漂白化机浆纤维形态电子显微镜分析[J]. 黑龙江造纸, 2008(1): 9-15. Huang G X, Yue J Q. Analysing the bleached extruder chemi-mechanical pulp of poplar by scan electron microscope[J]. Heilongjiang Pulp & Paper, 2008(1): 9-15. |