［1］康树萱,李春虹.关于杨木改性的设想[J].辽宁林业科技，2002(4):27-28.
Kang S X,Li C H. The idea on poplar modification[J].Journal of Liaoning Forestry Science & Technology,2002(4):27-28.
［2］章蓉,汤丽娟,许娟,等.氧冷等离子体处理条件对杨木胶合强度的影响[OL].中国科技论文在线,2010(09).http://www.paper.edu.cn/releasepaper/content/201009-31.
Zhang R,Tang L J,Xu J,et al. The Effect of oxygen cold plasma treatment on bonding strength of hybrid poplar veneers[OL].Sciencepaper Online,2010(09). http://www.paper.edu.cn/releasepaper/content/201009-31.
［3］汤丽娟,章蓉,周晓燕,等.氧冷等离子体处理对饰面中密度纤维板甲醛释放量的影响[J].南京林业大学学报:自然科学版,2011,35(2):69-72.
Tang L J,Zhang R,Zhou X Y,et al.Effect of O2-cold plasma treatment on formaldehyde emission from overlaying MDF[J].Journal of Nanjing Forestry University:Natural Sciences Edition,2011,35(2):69-72.
［4］杨喜昆,杜官本,钱天才,等.木材表面改性的XPS分析[J].分析测试学报,2003.22(4):5-8.
Yang X K,Du G B,Qian T C,et al.Analysis of the surface modification of wood by xray photoelectron spectroscopy[J]. Journal of Instrumental Analysis, 2003,22(4):5-8.
［5］Woo S K,HyunSu K,Sang H H.Atomic oxygen generation by insitu plasma and postplasma in dielectric barrier discharges for surface treatment[J].Thin Solid Films,2010,518(4):6578-6582.
［6］杜官本,华毓坤,王真.微波等离子体处理对杉木表面性能的影响[J].木材工业,1998,12(6):17-20
Du G B,Hua Y K,Wang Z.Surface performance of chinese fir wood treated by microwave plasma[J]. China Wood Industry,1998,12(6):17-20
［7］杜官本,华毓坤,王真，等.木材表面微波等离子体处理[C]//木材胶粘剂及人造板表面加工学术讨论会论文集.上海：中国林学会，1999.
［8］黄河浪,赵 明,董丽君,等.低温冷等离子体对不同含水率杨木单板表面改性的初步研究[J].林产工业,2010,37(3):20-22.
Huang H L,Zhao M,Dong L J,et al.The preliminary study on surface modification of hybrid poplar veneers with different moisture contents using cold plasma treatment[J].China Wood Industry, 2010,37(3):20-22.
［9］黄河浪,卢晓宁,薛丽丹，等.用氧等离子体处理改善竹地板胶合性能[J].浙江林学院学报,2006,23(5):486-490.
Huang H L,Lu X N,Xue L D,et al.Bonding performance of bamboo plywood improved by O2 plasma treatment[J].Journal of Zhejiang Forestry College,2006,23(5):486-490.
［10]Georg A,Gunthard S,Evelyn N,et al.Improved bondability of waxtreated wood following plasma treatment[J].Wood Science Technology,2011,45:358-368.
［11]Avramidis G, Nothnick E, Militz H,et al.Accelerated curing of PVAc adhesive on plasmatreated wood veneers[J].European Journal of Wood and Wood Products,2011,69(2):329-332.
［12]中国林业科学研究院木材工业研究所.GB/T 9846.3—2004 普通胶合板通用技术条件[S].北京：中国标准出版社，2004.
［13]Jamali A, Evans P D.Etching of wood surfaces by glow discharge plasma[J].Wood Science Technology,2011,45:169-182.
［14]孙文专,田俊莹,黄 侃.微波低温等离子体处理羊绒染色性能的影响[J].染整技术,2010,32(2):6-8.
Sun W Z,Tian J Y,Huang K.Effect of microwave cold plasma treatment on the dyeing properties of cashmere[J].Textile Dying and Finishing Journal,2010,32(2):6-8.
［15]Wolkenhauer A, Avramidis G, Cai Y, et al.Investigation of wood and timber surface modification by dielectric barrier discharge at atmospheric pressure[J].Plasma Processes and Polymers,2007,(4):470-474.
［16]Jia C X, Chen P, Li B,et al. Effects of Twaron fiber surface treatment by air dielectric barrier discharge plasma on the interfacial adhesion in fiber reinforced composites[J]. Surface & Coatings Technology,2010,204:3668-3675.
［17]Sun J,Wang C X,Yao L,et al. ESR study on fibers treated with atmospheric dielectric barrier discharge plasma[J].Journal of Xi′an Polytechnic University,2009,23(2):262-264.
|
