电磁屏蔽碳毡叠层型胶合板的性能研究

doi:10.3969/j.issn.1000-2006.2017.01.024

国家林草科技领军期刊
中国精品科技期刊
中国高校百佳科技期刊
江苏省新闻出版政府奖期刊奖
RCCSE林学权威期刊（A+）
CSCD核心期刊
Scopus数据库收录期刊
中文核心期刊
SCD核心期刊

作者加群：102861116

微信公众号：南京林业大学学报

高级检索

南京林业大学学报（自然科学版） ›› 2017, Vol. 60 ›› Issue (01): 156-162.doi: 10.3969/j.issn.1000-2006.2017.01.024

电磁屏蔽碳毡叠层型胶合板的性能研究

侯俊峰^{1, 2},傅峰¹,卢克阳^1*

1.中国林业科学研究院木材工业研究所,国家林业局木材科学与技术重点实验室, 北京 100091;
2.浙江农林大学工程学院,浙江临安 311300

出版日期:2017-02-18 发布日期:2017-02-18
基金资助:
基金项目:国家林业公益性行业科研专项项目(201104004)
第一作者:侯俊峰(chinajunfeng2008@163.com),博士生。*通信作者:卢克阳(luky@caf.ac.cn),副研究员。

Research on properties of plywood laminated with electromagnetic shielding carbon felts

HOU Junfeng^{1, 2}, FU Feng¹, LU Keyang^1*

1.Key Laboratory of Wood Science and Technology, State Forestry Administration, Research Institute of Wood Industry, CAF, Beijing 100091, China;
2.College of Engineering, Zhejiang Agriculture and Forestry University, Lin’an 311300, China

Online:2017-02-18 Published:2017-02-18

摘要/Abstract

摘要： 【目的】基于叠层型电磁屏蔽结构模型,将电磁屏蔽碳毡与杨木单板叠层复合制备抗电磁干扰的电磁屏蔽胶合板。研究了电磁屏蔽碳毡的碳纤维填充量对该胶合板的电磁屏蔽性能与胶合性能的影响, 进而探究双层叠层型电磁屏蔽结构模型的可行性。【方法】采用同轴测试方法和抗剪实验分别测试了电磁屏蔽碳毡叠层型胶合板的电磁屏蔽性能和胶合性能,通过微观结构表征分析了碳纤维在电磁屏蔽碳毡内的网络搭接状况。【结果】当碳纤维填充量达到25 g/m²时,电磁屏蔽碳毡内开始形成“三维电磁屏蔽网络”。电磁屏蔽碳毡叠层型胶合板的屏蔽效能随着碳纤维填充量的增加而逐渐增大; 当碳纤维填充量为120 g/m²时, 双层电磁屏蔽碳毡叠层型胶合板的屏蔽效能为52.61～68.37 dB(100 kHz～1.5 GHz),达到中等屏蔽效果(60～90 dB)。在碳纤维填充量相同的条件下,双层电磁屏蔽碳毡叠层型胶合板的屏蔽性能优于单层电磁屏蔽碳毡叠层型胶合板; 前者的电磁屏蔽优势随着碳纤维填充量与测试频率的增加而逐渐减小。此外,双层电磁屏蔽碳毡叠层型胶合板的胶合强度大于单层电磁屏蔽碳毡叠层型胶合板的胶合强度。电磁屏蔽碳毡叠层型胶合板的胶合强度大于GB/T 9846.3—2004 Ⅰ类胶合板标准所规定的杨木单板最低胶合强度值(0.7 MPa)。【结论】电磁屏蔽碳毡的双层叠层复合有效提高了电磁屏蔽碳毡叠层型胶合板的电磁屏蔽性能和胶合性能,证实了双层叠层型电磁屏蔽结构模型的可行性。

Abstract: 【Objective】Based on the structural model of laminated electromagnetic shielding, electromagnetic shielding carbon felts were laminated with poplar veneers to manufacture electromagnetic shielding plywood to efficiently minimize the hazard caused by electromagnetic interference. Effects of the carbon fiber filler content of the electromagnetic shielding carbon felt on electromagnetic shielding performance and bonding performance of the manufactured plywood were investigated. In addition, the feasibility of the double-layer laminated shielding structure was analyzed.【Method】Shielding effectiveness(SE)and shear strength of the plywood laminated with electromagnetic shielding carbon felts were investigated by using a coaxial test and shear test, respectively. Furthermore, carbon fiber distributions in the plane and cross-sections of the electromagnetic shielding carbon felt were observed by using a metallurgic microscope.【Result】It was observed that a “three-dimensional electromagnetic shielding network” was starting to form in the electromagnetic shielding carbon felt as the carbon fiber filler content increased to 25 g/m². The results revealed that the SE of plywood laminated with electromagnetic shielding carbon felts increased with increasing carbon fiber filler content. It was found that SE of the plywood, which was laminated with a double-layer electromagnetic shielding carbon felt(120 g/m²), ranged from 52.61 to 68.37 dB(100 kHz-1.5 GHz), and had a medium shielding performance(60-90 dB). Additionally, plywood laminated with the double-layer electromagnetic shielding carbon felts exhibited higher SE than the plywood laminated with the single-layer electromagnetic shielding carbon felt at the same total carbon fiber filler content. However, the SE advantage of the former was reduced with the increase in carbon fiber filler content and testing frequency. The results also revealed that the plywood laminated with double-layer electromagnetic shielding carbon felt exhibited greater shear strength than plywood laminated with single-layer electromagnetic shielding carbon felt. The shear strength of plywood laminated with electromagnetic shielding carbon felts exceeded the minimum value of 0.7 MPa, which is required by the Chinese plywood standard of GB/T 9846.3—2004. 【Conclusion】 Electromagnetic shielding performance and bonding performance of the manufactured plywood are effectively improved after the lamination of electromagnetic shielding carbon felts. Furthermore,the laminated structure model was proved to be feasible in this study.

中图分类号:

TS653.3

侯俊峰,傅峰,卢克阳. 电磁屏蔽碳毡叠层型胶合板的性能研究[J]. 南京林业大学学报（自然科学版）, 2017, 60(01): 156-162.

HOU Junfeng, FU Feng, LU Keyang. Research on properties of plywood laminated with electromagnetic shielding carbon felts[J].Journal of Nanjing Forestry University (Natural Science Edition), 2017, 60(01): 156-162.DOI: 10.3969/j.issn.1000-2006.2017.01.024.

参考文献

[1] VAN DER TOGT R, VAN LIESHOUT E J, HENSBROEK R, et al. Electromagnetic interference from radio frequency identification inducing potentially hazardous incidents in critical care medical equipment[J]. JAMA, 2008, 299(24): 2884-2890. DOI:10.1001/jama.299.24.2884.
[2] ALMEID L C. Environment, biologic rhythms, depression and EM radiations[J]. Research Journal of Environmental and Earth Sciences, 2011(2): 81-89.
[3] AL-NIMER M, MAJEED A, ALHUSSEINY A. Electromagnetic energy radiated from mobile phone alters electrocardiographic records of patients with ischemic heart disease[J]. Annals of Medical and Health Sciences Research, 2012, 2(2): 146-151. DOI:10.4103/2141-9248.105662.
[4] KUHN M G, ANDERSON R J. Soft tempest: hidden data transmission using electromagnetic emanations[J].Information Hiding, 1998,1525: 124-142. DOI:10.1007/3-540-49380-8_10.
[5] MAO J, LI Y M, ZHANG J M,et al. Model for electromagnetic information leakage[J]. TELKOMNIKA Indonesian Journal of Electrical Engineering, 2014, 12(2):894-898. DOI:10.11591/telkomnika.v12i2.4010.
[6] 卢克阳, 傅峰, 蔡智勇, 等. 铜纤维填充脲醛树脂导电膜片的电磁屏蔽性能[J]. 林业科学, 2011, 47(7): 166-171.DOI:10.11707/j.001-7488.20110726 LU K Y, FU F, CAI Z Y, et al. Electromagnetic shielding property of UF adhensive conductive sheets filled with copper fibers[J]. Scientia Silvae Sinicae, 2011, 47(7): 166-171.
[7] 于名讯, 徐勤涛, 庞旭堂, 等. 电磁屏蔽材料的研究进展[J]. 宇航材料工艺, 2012, 42(4): 12-15. DOI:10.3969/j.issn.1007-2330.2012.04.003. YU M X, XU Q T, PANG X T, et al. Research progress of electromagnetic interference shielding materials[J].Aerospace Materials & Technology, 2012, 42(4): 12-15.
[8] 朱家琪, 罗朝晖, 黄泽恩. 金属网与木单板的复合[J]. 木材工业, 2001, 15(3): 5-7. DOI:10.3969/j.issn.1001-8654.2001.03.002. ZHU J Q, LUO Z H, HUANG Z E. Composition of wire net and wood veneer[J]. China Wood Industry, 2001, 15(3): 5-7.
[9] LU K Y, FU F, CAI Z Y, et al. Nondestructive methods for evaluating mechanical properties of wood electromagnetic shielding composite [G]. 16^thInternational Symposium on Nondestructive Testing and Evaluation of Wood, 2009: 208-215.
[10] 卢克阳, 傅峰, 蔡智勇, 等. 导电膜片叠层型电磁屏蔽胶合板屏蔽持久性研究[J]. 南京林业大学学报(自然科学版), 2010, 34(5): 79-82. DOI:10.3969/j.issn.1000-2006.2010.05.017. LU K Y, FU F, CAI Z Y, et al. Study on shielding permanence of electromagnetic shielding plywood laminated with conductive sheets[J]. Journal of Nanjing Forestry University(Natural Sciences Edition), 2010, 34(5): 79-82.
[11] CHANG H, YEH Y M, HUANG K D. Electromagnetic shielding by composite films prepared with carbon Fiber, Ni nanoparticles, and multi-walled carbon nanotubes in polyurethane[J]. Materials Transactions, 2010, 51(6):1145-1149. DOI:10.2320/matertrans.m2009408.
[12] 刘贤淼, 傅峰. 导电粉末与木单板复合材料性能研究[J]. 南京林业大学学报(自然科学版), 2009, 33(2): 95-98. DOI:10.3969/j.issn.1000-2006.2009.02.023. LIU X M, FU F. Study on performance of electro-conductive powder and veneer composite[J]. Journal of Nanjing Forestry University(Natural Sciences Edition), 2009, 33(2): 95-98.
[13] 刘贤淼, 傅峰. 不锈钢纤维/木单板复合电磁屏蔽功能胶合板[J]. 木材加工机械, 2008, 19(5): 22-26,30.DOI:10.3969/j.issn.1001-036X.2008.05.006. LIU X M, FU F. Stainless stee fiber/veneer composite electromagnetic-shield effectiveness plywood[J].Wood Processing Machinery, 2008, 19(5): 22-26,30.
[14] CHEN G, WU B, CHEN Z F. Shielding performance of metal fiber composites[J]. Transactions of Nonferrous Metals Society of China, 2004, 14(S1):493-496.
[15] PERUMALRAJ R, DASARADAN B S, ANBARASU R, et al. Electromagnetic shielding effectiveness of copper core-wovenfabrics[J]. Journal of the Textile Institute, 2009, 100(6): 512-524. DOI:10.1080/00405000801997587.
[16] MATSUMOTO N, NAIRN J A. The fracture toughness of medium density fiberboard(MDF)including the effects of fiber bridging and crack-plane interference[J]. Engineering Fracture Mechanics, 2009, 76(18): 2748-2757. DOI:10.1016/j.engfracmech.2009.04.007.
[17] KHAN T A, GUPTA A, JAMARI S S, et al. Synthesis and characterization of carbon fibers and their application in wood composites[J]. Bio Resources, 2013, 8(3):4171-4184. DOI:10.15376/biores.8.3.4171-4184.
[18] WANG X, FU X, CHUANG D D L. Electromechanical study of carbon fiber composites[J]. Journal of Materials Research, 1998, 13(11): 3081-3092. DOI:10.1557/jmr.1998.0420.
[19] JOU W S. A novel structure of woven continuous-carbon fiber composites with high electromagnetic shielding[J].Journal of Electronic Materials, 2004, 33(3): 162-170. DOI:10.1007/s11664-004-0175-x.
[20] 卢克阳, 傅峰. 电磁屏蔽胶合板同轴测试方法的改进[J]. 南京林业大学学报(自然科学版), 2008, 32(1): 53-56. DOI:10.3969/j.issn.1000-2006.2008.01.012. LU K Y, FU F. Improvement of coaxial test method for the electromagnetic shielding plywood[J]. Journal of Nanjing Forestry University(Natural Sciences Edition), 2008, 32(1): 53-56.
[21] 卢克阳, 傅峰, 蔡智勇, 等. 铜纤维/脲醛树脂复合膜片的导电性能[J]. 林业科学, 2009, 45(7): 169-174. DOI:10.3321/j.issn:1001-7488.2009.07.030. LU K Y, FU F, CAI Z Y, et al. Conductive propenies of uf adllesive sheets filled with copper fiber[J].Scientia Silvae Sinicae, 2009, 45(7): 169-174.
[22] 王立娟, 李坚, 刘一星. 化学镀法制备电磁屏蔽木材-Ni-P复合材料研究[J]. 材料科学与工艺, 2006, 14(3): 296-299,304. DOI:10.3969/j.issn.1005-0299.2006.03.021. WANG L J, LI J, LIU Y X. Study on electromagnetic shielding wood ni-p composite prepared by electroless nickel plating[J]. Materials Science and Technology, 2006, 14(3): 296-299,304.
[23] LU K, FU F, SUN H L, et al. Bonding technology of electromagnetic shielding plywood laminated with conductive sheets[J]. Wood Research, 2013, 58(3):465-474.
[24] 张晓宁. 层状复合电磁屏蔽材料的设计与制备[D]. 北京:北京工业大学, 2000. ZHANG X N. Design and manufacture of laminated electromagnetic shielding composites [D]. Beijing: Beijing University of Technology, 2000.
[25] 卢克阳, 傅峰, 蔡智勇, 等. 导电膜片叠层型电磁屏蔽胶合板的性能研究[J]. 建筑材料学报, 2011, 14(2): 207-211,233. DOI:10.3969/j.issn.1007-9629.2011.02.012. LU K Y, FU F, CAI Z Y, et al. Study of porperties of electromagnetic shielding plywood laminated with conductive sheets[J]. Journal of Building Materials, 2011, 14(2): 207-211,233.

电磁屏蔽碳毡叠层型胶合板的性能研究

Research on properties of plywood laminated with electromagnetic shielding carbon felts

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

本文评价

作者

读者

审稿

[1]	王真,屈伟,吴玉章. 阻燃氨基树脂对胶合板燃烧时CO和CO₂释放的影响[J]. 南京林业大学学报（自然科学版）, 2017, 60(03): 140-144.
[2]	孙晓婷,唐启恒,常亮,郭文静. 冷结晶对杨木纤维/聚乳酸复合材料性能的影响[J]. 南京林业大学学报（自然科学版）, 2016, 59(04): 137-142.
[3]	方露,王正,熊先青,王雪花,吴智慧. 引发剂对硅烷化杨木单板/聚乙烯薄膜复合材料性能的影响[J]. 南京林业大学学报（自然科学版）, 2016, 59(03): 133-136.
[4]	关明杰,王路,常馨曼. 杨木／酚醛树脂胶合界面相的荧光跟踪解析[J]. 南京林业大学学报（自然科学版）, 2013, 56(05): 125-128.
[5]	王伟,房超,张彰,贺磊,孙慧宇,徐波. 集装箱底板用胶合板中铬、砷含量的检测[J]. 南京林业大学学报（自然科学版）, 2013, 56(04): 175-178.
[6]	李改云,吴玉章,李伯涛,秦特夫. 三聚氰胺改性脲醛树脂的合成及其在阻燃胶合板中的应用[J]. 南京林业大学学报（自然科学版）, 2012, 55(04): 103-106.
[7]	秦特夫，吴玉章，黄洛华. 木塑复合材料燃烧性能的研究[J]. 南京林业大学学报（自然科学版）, 2011, 54(01): 71-74.
[8]	卢克阳,傅峰,蔡智勇,付跃进,张跃明. 导电膜片叠层型电磁屏蔽胶合板屏蔽持久性研究[J]. 南京林业大学学报（自然科学版）, 2010, 53(05): 79-82.
[9]	王卫东;王志强;路孝君;卢晓宁. 金属网增强型杨木单板层积材的研究[J]. 南京林业大学学报（自然科学版）, 2003, 46(06): 9-12.