Dynamic wettability of precompressed poplar

HAN Shuguang, HUANG Runzhou, ZHOU Zhaobing, ZHANG Yang

Journal of Nanjing Forestry University (Natural Sciences Edition） ›› 2009, Vol. 33 ›› Issue (06) : 11.

南京林业大学学报（自然科学版）
Journal of Nanjing Forestry University (Natural Sciences Edition） ›› 2009, Vol. 33 ›› Issue (06) : 11. DOI: 10.3969/j.jssn.1000-2006.2009.06.003

Dynamic wettability of precompressed poplar

  • HAN Shuguang, HUANG Runzhou, ZHOU Zhaobing, ZHANG Yang
Author information +
History +

Abstract

Wettability is an important surface characteristics which describes what happens at the wood surface when it contacts with an adhesive. A wetting model was developed to describe the wetting process of adhesives at the woodbased material surface. The K value was used to evaluate the kinetics of wetting during the adhesive wetting process. Applying the wetting model, urea formaldehyde resin (UF) and phenol formaldehyde resin (PF) wetting properties of precompressed poplar at different compressing process conditions were investigated. Moreover, the effects of the parameters of poplar precompressing, e.g.compression ratio, the platen temperature and the pressing time on wettability were compared. The results showed that the wetting model could accurately describe the dynamic adhesive wetting process at precompressed poplar surface. The pressing time was the most significant factor which affects K value.

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
HAN Shuguang, HUANG Runzhou, ZHOU Zhaobing, ZHANG Yang. Dynamic wettability of precompressed poplar[J]. Journal of Nanjing Forestry University (Natural Sciences Edition）. 2009, 33(06): 11 https://doi.org/10.3969/j.jssn.1000-2006.2009.06.003

References

[1]Zhang B G. Wood Sci & Tech[M]. Beijing: China Environment Science Press, 2004.
[2]Li J. Wood Science[M]. Beijing: Higher Education Press, 2002.
[3]Wei X L, Xiang S L, He H. Effect of hydrothermal treatment on physical and mechanical properties of compressed poplar wood[J]. China Wood Industry, 2004, 8(3): 20-22.
[4]Chen C M. Measuring the wetting of wood surfaces by adhesives[J]. Mokuzai Gakkaishi, 1972, 18(9): 451-456.
[5]Liptáková E, Kúdela J. Analysis of the wood-wetting process[J]. Holzforschung, 1994, 48: 139-144.
[6]Halliday D R, Rensick R, Walker J. Fundamental of Physics[M]. New York: John Wiley & Sons, Inc, 1997. [7]Maldas D C, Kamdem D P. Surface tension and wettability of CCA-treated red maple[J]. Wood Fiber Sci, 1998, 30(4): 368-373.
[8]Scheikl M, Dunky M. Measurement of dynamic and static contact angles on wood for determination of its surface tension and the penetration of liquids into the wood surface[J]. Holzforschung, 1998, 52(1): 89-94.
[9]Liu F P, Gardner J D, Wolcott M P. A model for the description of polymer surface dynamic behavior: Contact angle vs.polymer surface properties[J]. Langmuir, 1995, 11: 2674-2681.
[10]Shi S Q, Gardner D J. Dynamic adhesive wettability of wood[J]. Wood Fiber Science, 2001, 33(1): 58-68.
[11]Zhou Z B, Zhang Y, Ja C. Describing on dynamic wettability of wood and woodbased materials[J]. Journal of Nanjing Forestry University: Natural Sciences Edition, 2007, 31(5): 71-74.
[12]Zhou Z B, Zhang Y, Yuan S F, et al. Study on the dynamic wettability of poplar[J]. Journal of Northeast Forestry University, 2008, 36(4): 20-21.

Accesses

Citation

Detail
Sections
Recommended
The full text is translated into English by AI, aiming to facilitate reading and comprehension. The core content is subject to the explanation in Chinese.

Author

Reader

Reviewer

www.nldxb.njfu.edu.cn

Edited ＆ Published by Editorial Department of Nanjing Forestry University(Natural Sciences Edition)
Address： No.159 Longpan Road,Nanjing 210037 Jiangsu,P.R.China
E-mail ：xuebao@njfu.edu.cn , xuebao@njfu.com.cn
Telephone +86-25-85428247,85427076
Distributed by China International Book Trading Corporation P.O. Box 399, Beijing ,P.R. China

/

〈 〉