Because the measuring result of azimuth for automobile headlamp beam is prominently influenced by the longitudinal bias angle of the automobile location, a correction method for measuring error was proposed based on digital image processing. Camera was used to take the image of the automobile location. The profile of the automobile’s figure was obtained with the OTSU adaptive threshold segmentation algorithm. The automobile longitudinal bias angle was figured out by the successive approach method. Finally, the measuring result of headlamp tester was corrected by the bias angle so that automatic correction is realized. The experimental results indicated that this method could effectively obviate the influence of the bias angle, and greatly improve the measuring precision of azimuth for automobile headlamp beam.
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1]公安部交通管理科学研究所,交通部公路科学研究所. GB 7258—2004机动车运行安全技术条件[S]. 北京:中国标准出版社,2004.
[2]朱志新. 汽车前照灯检测仪校准对正误差分析与控制[J]. 公路与汽运,2002(1):7-8.
[3]夏先扬. 前照灯检测时汽车摆正器的应用[J]. 中国汽车保修设备,2003(2):12-13.
[4]南京林业大学. 汽车前照灯测量误差修正方法.中国,ZL031319289[P/OL]. [2005-01-19]. http://search.sipo.gov.cn/sipo/zljs/hyjs-yx-new.jsp?recid=CN03131928.9&leixin=fmzl&title=汽车前照灯测量误差修正方法&ipc=B60S13/00.
[5]Rafael C Gonzalez, Richard E Woods. 数字图像处理[M]. 阮秋琦,阮宇智,译. 北京:电子工业出版社,2004.
[6]宋锦萍,职占江. 图像分割方法研究[J]. 现代电子技术,2006(6):59-61.
[7]赵瑶池,蔡自兴. 一种对光照具有鲁棒性的图像分割方法[J]. 计算机应用研究,2005(9):154-155.
[8]章小平,范九伦,裴继红. OTSU阈值方法的两种修改形式[J]. 西安邮电学院学报,2003,8(4):94-96.
[9]N Otsu. A threshold selection method from gray—level histogram[J]. IEEE Trans, 1979, SMC-9(1): 62-66.
[10]朱柳建. 基于图像处理的汽车前照灯检测技术的研究[D]. 南京:南京林业大学,2005.
[11]朱华勇. 汽车前照灯计算机检测图像处理技术的研究[D]. 南京:南京林业大学,2007.
PDF(791272 KB)
