The cross section structure characteristics of bamboo cell wall with 
an atomic force microscope

doi:10.3969/j.issn.1000-2006.2016.02.023

JOURNAL OF NANJING FORESTRY UNIVERSITY ›› 2016, Vol. 40 ›› Issue (02): 139-143.doi: 10.3969/j.issn.1000-2006.2016.02.023

Previous Articles Next Articles

The cross section structure characteristics of bamboo cell wall with an atomic force microscope

CHEN Hong^1,2, WU Zhihui^1*, FEI Benhua^2*

1. College of Funiture and Industrial Design, Nanjing Forest University, Nanjing 210037, China;
2. International Centre for Bamboo and Rattan, Beijing 100102, China

Online:2016-04-18 Published:2016-04-18

Abstract

Abstract: Bamboo fiber is the main component of bamboo, and the fiber structure affects the utilization of bamboo fiber(from one year old Neosinocalamus affinis)and bamboo culm. This paper studied the polystructure of bamboo fiber and the thickness of each layer with Peakforce QNM mode and Tapping mode in AFM. The results indicated that: Atomic force microscope is a good technology for studying the polylamellate structure and modulus of each layer of bamboo cell wall, and the thickness of each layer in cell wall can be measured with AFM. The modulus of each layer in cell wall was different, especially in the place between broad lamellate and narrow lamellate. The amount and thickness of layers in bamboo cell wall varied in different place in bamboo culm.

CLC Number:

S781

CHEN Hong, WU Zhihui, FEI Benhua. The cross section structure characteristics of bamboo cell wall with an atomic force microscope[J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2016, 40(02): 139-143.

References

[1] Wang G, Shi Q S, Wang J W, et al. Tensile of properties of four types of individual cellulosic fibers[J]. Wood and Fiber Science, 2011, 43(4): 353-364.
[2] Yu Y, Tian G L, Fei B H. Mechanical characterization of single bamboo fibers with nanoindentation and microtensile technique [J]. Holzforschung, 2011, 65(1): 113-119. Doi: 10.1515/hf.2011.009.
[3] Pesston R D, Singh K. The fine structure of bamboo fibres. I: Optical properties and x-ray data [J]. Journal of Experimental Botany, 1950, 1(2): 214-226.Doi: 10.1093/jxb/1.2.214.
[4] Tono T, Ono K. The layered structure and its morphological transformation by acid treatment [J]. Journal of Japanese Wood Research Society, 1962, 8: 245-249.
[5] Parameswaran N, Liese W. On the fine structure of bamboo fibres [J]. Wood Science and Technology, 1976, 10(4): 231-246.
[6] Parameswaran N, Liese W. Ultrastructural aspects of bamboo cells [J]. Cellulose Chemistry and Technology, 1980, 14: 587-609.
[7] Liese W. Structural research on bamboo and rattan for their wider utilization [J]. Journal of Bamboo Research, 1996, 15(2): 1-14.
[8] Fujii T. Cell-wall structure of the culm of Azumanezaza(Pleioblastus chino Max.)[J]. Mokuzai Gakhaishi,1985, 31(11): 865-872.
[9] Murphy R J, Alvin K L. Variation in fibre wall structure in bamboo [J]. IAWA Journal, 1992, 13(4): 403-410. Doi: 10.1163/22941932-90001296.
[10] Kirby A R, Gunning A P, Waldron K W, et al. Visualization of plant cell walls by atomic force microscopy [J]. Biophysical Journal, 1996, 70(3): 1138-1143. Doi: 10.1016/S0006-3495(96)79708-4.
[11] Thimm J C, Burritt D J, Ducker W A, et al. Celery(Apium graveolens L.)parenchyma cell walls examined by atomic force microscopy: effect of dehydration on cellulose microfibrils [J]. Planta, 2000, 212(1): 25-32.Doi: 10.1007/s004250000359.
[12] Davies L M, Harris P J. Atomic force microscopy of microfibrils in primary cell walls [J]. Planta, 2003, 217(2): 283-289.Doi: 10.1007/s00425-003-0979-6.
[13] Niimura H, Yokoyama T, Kimura S, et al. AFM observation of ultrathin microfibrils in fruit tissues [J]. Cellulose, 2010, 17(1): 13-18. Doi: 10.1007/s10570-009-9361-6.
[14] Pakzad A, Simonsen J, Yassar R S. Gradient of nanomechanical properties in the interphase of cellulose nanocrystal composites [J]. Composites Science and Technology, 2012, 72(2): 314-319. Doi:10.1016/j.compscitech.2011.11.020.
[15] Pittenger B, Erina N, Su C M. Quantitative mechanical property mapping at the nanoscale with Peakforce QNM [Z]. Newyork, USA:Plinview, Veeco Instruments Inc, 2010.
[16] Zhang S Y, Wang C G, Fei B H, et al. Mechanical function of lignin and hemicelluloses in wood cell wall revealed with microtension of single wood fiber[J]. Bio Resources, 2013, 8(2): 2376-2385.
[17] 王昊. 竹塑复合材料界面微纳力学表征方法研究[D]. 北京:中国林业科学研究院, 2014:49-60.
[18] Hansma H G, Kim K J, Laney D E, et al. Properties of biomolecules measured from atomic force microscope images: a review [J]. Journal of Structural Biology, 1997, 119: 99-108. Doi:10.1006/jsbi.1997.3855.
[19] Fahlén J, Salmén L. Cross-sectional structure of the secondary wall of wood fibers as affected by processing [J]. Journal of materials Science, 2003, 38(1):119-126. Doi: 10.1023/A:1021174118468.
[20] 余雁,江泽慧,王戈,等. 毛竹纤维微纤丝取向的原子力显微镜的观察[J]. 北京林业大学学报,2008, 30(1): 124-127. Doi: 1000-1522(2008)01-0124-04. Yu Y, Jiang Z H,Wang G, et al.Visualization of cellulose microfibrils of moso bamboo fibers with atomic force microscopy[J].Journal of Beijing Forestry University,2008,30(1):124-127.
[21] Thimm J C, Buritt D J, Ducker W A, et al. Pectins influence microfibril aggregation in celery walls: an atomic force microscopy study [J]. Journal of Structural Biology, 2009, 168(2): 337-344. Doi: 10.1016/j.jsb.2009.06.017.
[22] Fahlén J, Salmén L. Pore and matrix distribution in the fibre wall revealed by atomic force microscopy and image analysis [J]. BioMacromolecules, 2005, 6(1):433- 438. Doi: 10.1021/bm040068x.
[23] 刘波. 毛竹发育过程中细胞壁形成的研究[D]. 北京:中国林业科学研究院, 2008: 36-61.

Related Articles 15

[1]	ZHU Xianliang, ZHOU Changpin, JIA Cuirong, WENG Qijie, LI Fagen. Association of SNP loci and candidate genes for growth and wood density in Eucalyptus urophylla × E. tereticornis [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2021, 45(4): 143-150.
[2]	ZHU Yuehua, PAN Biao, YU Chaoguang, YIN Yunlong, ZHANG Yaoli. Comparative study on DBH growth and wood density of Taxodium hybrid ‘Zhongshanshan 118’ and Taxodium distichum [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2019, 43(6): 201-206.
[3]	YANG Tingting,GUAN Fangli,XU Aijun. Multiple trees contour extraction method based on Graph Cut algorithm [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2018, 42(06): 91-98.
[4]	WANG Dianbei, LI Jianhua,TIAN Chunyuan, ZHONG Yaqin, DUAN Lijun,YANG Xianzhong. Variation in fiber morphology among wild Pteroceltis tatarinowii populations in Hubei Province [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2018, 42(01): 169-174.
[5]	YANG Jianfei, NING Liping, YANG Liao, WANG Tianshi, CHEN Tiantian QIAN Yuying. Variation in radial increment of Lindera megaphylla and its wood anatomical characteristics [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2018, 42(01): 181-187.
[6]	YUAN Bingnan,DONG Yue,GUO Minghui. Immobilized of g-C₃N₄ on wood surface and characterization of its photodegradation property [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2018, 42(01): 193-197.
[7]	TU Kunkun, KONG Lizhuo, WANG Xiaoqing. Fabrication of superhydrophobic SiO₂/epoxy resin/fluorinated alkylsilane nanocomposite coatings on wood surfaces [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(06): 158-162.
[8]	LIU Rong,YANG Shumin, LI Hui, ZHAI Zhiwen, FEI Benhua. Characteristics of pits in the vessel element of moso bamboo (Phyllostachys edulis(Carr.)J.Houz.) [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(06): 163-168.
[9]	WANG Yuting, XU Huadong, ZHOU Hanting, CAO Yanjun, JI Li. Effects of environmental temperatures on internal moisture content of standing trees [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(05): 107-113.
[10]	WANG Xueyu, LYU Wenhua. Strengths and light fastness of the strengthening-dyeing modified poplar wood [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(05): 147-151.
[11]	GUAN Cheng, ZHANG Houjiang,MIAO Hu, ZHOU Lujing. Non-destructive determination of modulus of elasticity and in-plane shear modulus of full-size wood composite panels [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(04): 153-159.
[12]	LIU Fenglu, JIANG Fang, WANG Xiping, ZHANG Houjiang, LIU Xingkai. Stress wave propagation patterns in larch standing trees [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(03): 133-139.
[13]	GAO Xin, CAI Jiabin, JIN Juwan, ZHUANG Shouzeng. Bound water content and pore size diameter distribution in swollen cell walls determined by NMR cryoporometry [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(02): 150-156.
[14]	HE Sheng, XU Jun, WU Zaixing, BAO Yongjie, YU Hui, CHEN Yuhe. Compare of porous structure of moso bamboo and Pinus sylvestris L. lumber [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(02): 157-162.
[15]	XU Huadong, WANG Yuting, WANG Lihai, WANG Xiping. A review on ice formation and propagation in wood cells at subzero temperatures [J]. JOURNAL OF NANJING FORESTRY UNIVERSITY, 2017, 41(02): 169-174.

Metrics

Comments

www.nldxb.njfu.edu.cn

Edited ＆ Published by Editorial Department of Nanjing Forestry University(Natural Sciences Edition)
Address： No.159 Longpan Road,Nanjing 210037 Jiangsu,P.R.China
E-mail ：xuebao@njfu.edu.cn , xuebao@njfu.com.cn
Telephone +86-25-85428247,85427076
Distributed by China International Book Trading Corporation P.O. Box 399, Beijing ,P.R. China

The cross section structure characteristics of bamboo cell wall with an atomic force microscope

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

Author

Reader

Reviewer