With no resin, spreading resin and impregnating resin under pressure, the relation between the veneer’s mechanical properties of length and breadth after hot pressing and the density were researched in a systematic way. Base on mixture mode of fiberreinforced composites and stiffness theory of laminate respectively, formulate the MOE model of physics and math of veneers which were treated with heat, pressure and resin. The result shows: (1)The veneer treated with heat, pressure and resin can get 3 times MOE on perpendicular diction than the veneer without treated. (2)The parallel MOE of veneer spreaded and impregnated resin under pressure will be increased with the density, and their increasing speed is lower than that of the compressed veneer. (3) After multiplying a coefficient k, here k=0.76, the perpendicular MOE model of the resin spreading veneer is close to the test value. (4)According to the theory of layer panel, the veneer with resin impregnated under pressure was divided 21 layers altogether with 11 thin veneer’s layers and 10 thin resin layers, and the model is close to the test value with 5.8 % deviation in parallel and 1.7 % deviation in perpendicular.
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1]Yi Xianghua. Effective heat compessing technique of Sugi veneer for LVL[R]. Nanjing: Proceedings of Symposium on Utilization of Agricultural and Forestry Residues in Nanjing, China, 2001.
[2]刘君良,江泽慧,孙家杰,等. 酚醛树脂处理杨树木材物理力学性能测试[J]. 林业科学,2002,38 (4):27-29.
[3]卢晓宁,陈宇聪,陈颖. 速生杨木单板弹性顺纹模量预测模型[J]. 南京林业大学学报:自然科学版 ,2002,26(3):9-13.
[4]Kollmann F F P. Principles of Wood Science and Technology, I, Solid wood[M]. New York: SpingerVerlag, 1968.
[5]蔡四维. 复合材料结构力学[M]. 北京:人民交通出版社,1987.
[6]张德庆. 高分子材料科学导论[M]. 哈尔滨:哈尔滨工业出版社,1999.
[7]Jozsef Bodig, Benjamin A Jayne. Mechanics of Wood and Wood Composites[M]. New York: Van Nostrand Reihold Company, 1982.
[8]孙丰文. 竹木复合集装箱底板的结构力学性能的模型理论与强度预测[D]. 南京:南京林业大 学,2001.
[9]许斌. OSB单板复合集装箱底板刚度模型及工艺研究[D]. 南京:南京林业大学,2008. (责任编辑李燕文)
PDF(1109553 KB)
