According to the production situation that the pressure in one frame unit of continuous hot press was uniform, a singleopening hot press was applied to simulate the working status of different frame unit for investigating the properties of fiberboards with different thickness(7.8 mm and 10.8 mm) under two kinds of pressure curve(P1,P2). The results showed that P1 was better than P2 when thickness of fiberboard was 7.8 mm; P2 was better than P1 when thickness of fiberboard was 10.8 mm, and at this time all the properties of fiberboards which started from frame 36 under both pressure curves were in accordance with national standard of fiberboard. Moreover, the starting position of applying pressure in the whole of frame units was related to the thickness of fiberboard. The thinner the thickness of fiberboard, the earlier the applying pressure.
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1]胡广斌，肖小兵.我国纤维板生产线的压机装备水平[J].林产工业，2009,36(5)：7-8.
[2]朱典想，王正.连续平压热压机的进展[J].林产工业，2003,30(5)：14-18.
[3] 黄菊花，肖安崑，许益民.连续平压机板厚控制液压系统[J].重庆高等专科学校学报，1999,14(3-4)：108-110.
[4]美卓公司人造板部.带冷却段的中密度纤维板连续压机[J].林产工业，2002,29(2)：48-51.
[5]叶世俊.连续平压法生产薄型刨花板工艺研究[J].人造板通讯，2004,12(3)：12-14.
[6]陈铭奎.连续压机冷却技术的探讨[J].福建林业科技，2004,31(3):98-103.
[7]满文焕，兴丰.中密度纤维板生产技术发展趋势[J].北京林业大学学报，2002,24(2)：79-82.
[8]肖安崑，黄玉水.连续平压机电控系统探讨[J].南昌大学学报：工科版，1999,21(4)：26-29.
[9]李金热.连续平压热压机机架的应力分析[J].南京工业职业技术学院学报，2002,2(2)：5-10.
[10]上海人造板机器厂有限公司.双钢带平压机连续压机[J].装备机械，2005(2)：23.
[11]郑开镇.浅析连续平压法生产MDF热压工艺的控制[J].木材工业，1999,13(6)：34-36.
[12]陈德旺.连续压机中密度纤维板密度曲线分析[J].中国人造板，2001（2）:17-19.
[13]张荣其.双钢带连续压机的结构、工作原理与计算[J].中国人造板，2006(12)：23-26.
[14]潘淑清，周玉申.高密度纤维板连续平压生产线工艺设计[J].木材加工机械，2003(4)：1-8.
[15]陈德旺.连续平压法生产MDF的热压工艺[J].林产工业，2005,32(4)：32-38.
PDF(1697276 KB)
