[1] Wang J Y, Cooper P A. Effect of oil type, temperature and time on moisture properties of hot oil-treated wood [J]. Holz Roh-Werkst, 2005, 63(6):417-422.
[2] Korkut S, Akgül M, Dündar T. The effects of heat treatment on some technological properties of Scots pine(Pinus sylvestnis L.)wood [J]. Bioresource Technology, 2008, 99(6):1861-1868.
[3] Gunduz G, Korkut S, Aydemir D, et al. The density, compression strength and surface hardness of heat treated hornbeam(Carpinus betulus L.)wood [J]. Maderas Cienciay Technologia, 2009, 11(1):61-70.
[4] Borrega M, Kärenlampi P. Mechanical behavior of heat-treated spruce(Picea abies)wood at constant moisture content and ambient humidity [J]. Holz Roh Werkst, 2008, 66(1): 63-69.
[5] 顾炼百,涂登云,于学利. 炭化木的特点及应用[J].中国人造板,2007,14(5):30-32,37.
[6] 龙超,郝丙业,刘文斌,等. 热处理木材的工艺及应用[J]. 木材工业, 2007,21(6): 44-46.
[7] Johansson D. Strength and color response of solid wood to heat treatment [D]. Luleå:Luleå University of Technology Department of Skellefte Campus, Division of Wood Technology, 2005.
[8] Kubojima Y, Okano T, Ohta M. Bending strength and toughness of heat-treated wood [J]. J Wood Sci, 2000, 46(1): 8-15.
[9] 邓邵平,杨文斌,陈瑞英,等.人工林杉木木材力学性质对高温热处理条件变化的响应[J]. 林业科学,2009,45(12):105-111.
[10] 曹永建. 蒸汽介质热处理木材性质及其强度损失控制原理[D].北京:中国林业科学研究院,2008.
[11] 丁涛,贝政廷,李源. 热处理对杉木结晶度的影响及其与力学性能的关系[C]//第十三次全国木材干燥学术研讨会论文集.南京:南京林业大学,2011.
[12] 谢桂军,苏海涛,张燕君,等.真空热处理改性马尾松木材物理性能研究[J].广东林业科技, 2009, 25(3): 42-45.
[13] 谢桂军,刘磊,廖红霞,等.马尾松木材热处理研究[J]. 广东林业科技,2007,23(4):6-10.
[14] 刘星雨. 高温热处理木材的性能及分类方法探索[D].北京:中国林业科学研究院,2010.
[15] 陈建云. 樟子松木材压力高温热处理工艺及材性研究[D].南京:南京林业大学,2008.
[16] 丁涛,顾炼百.185 ℃高温热处理对水曲柳木材力学性能的影响[J].林业科学,2009,45(2):92-97.
[17] 程大莉.高温热处理杉木木材的工艺及性能研究[D].南京:南京林业大学,2007.
[18] 郝东恩.杨木超高温热处理的研究[D].南京:南京林业大学,2008.
[19] Phuong L X, Shida S, Saito Y, et al. Effect of heat treatment on bending strength and decay resistance of Styrax tonkinensis wood [J]. Wood Preservation, 2006, 32(1):7-12.
[20] Finnish. Thermo Wood Associatior. Thermo Wood Handbook[OL].(2011-06-10)www.thermowood.fi.data.php/200503/199344200503160912.Thermoeng.pdf.
[21] 孙伟伦,李坚.高温热处理落叶松木材尺寸稳定性及结晶度分析表征[J],林业科学,2010,46(12):114-118.
[22] 李惠明,陈人望,严婷,等.热处理改性木材的性能分析.Ⅱ:热处理材的化学组成与耐腐防霉性能[J].木材工业,2009,23(3):46-48.
[23] 侯玲艳,安珍,赵荣军,等.蒸汽介质热处理对竹材表面润湿性的影响[J].福建林学院学报,2010,30(1):92-96.
[24] Michiel J B, B(^overo)ke T. Chemical analysis of heat treated softwoods[J]. Holz als Roh-und Werkstoff, 2006, 64(3): 204–211.
[25] Windeisen E., Böchle H, Zimmer B, et al. Relations between chemical changes and mechanical properties of thermally treated wood [J]. Holzforschung, 2009, 63: 773-778.