Finite element analysis for end-pressure of finger-jointed lumber

HE Sheng,LIN Lanying,FU Feng,CAO Pingxiang

JOURNAL OF NANJING FORESTRY UNIVERSITY ›› 2014, Vol. 38 ›› Issue (02) : 16-20.

PDF(1639941 KB)
南京林业大学学报（自然科学版）
PDF(1639941 KB)
JOURNAL OF NANJING FORESTRY UNIVERSITY ›› 2014, Vol. 38 ›› Issue (02) : 16-20. DOI: 10.3969/j.issn.1000-2006.2014.02.004

Finite element analysis for end-pressure of finger-jointed lumber

  • HE Sheng1,LIN Lanying1*,FU Feng1,CAO Pingxiang2
Author information +
History +

Abstract

By using the software of ANSYS for finite element analysis, the end-pressure range of Pinus sylvestris L. finger jointed lumber for structural use under three different fitness ratio were modeled. According to the modeling results, the end-pressure range were 1.5-3.0 MPa, 2.0-3.5 MPa and 2.5-4.5 MPa respectively when the fitness ratio are 0, 0.1 and 0.3 mm. Comparing the modeling results with the experimental results, it indicated that the end-pressure range from the modeling result was narrower than that of the experimental results. Therefore, the modeling can be used to predict the optimum end-pressure for finger jointed lumber, which showed that the optimal value of Pinus Sylvestris L. finger jointed lumber for structural was 3.5 MPa.

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations
HE Sheng,LIN Lanying,FU Feng,CAO Pingxiang. Finite element analysis for end-pressure of finger-jointed lumber[J]. JOURNAL OF NANJING FORESTRY UNIVERSITY. 2014, 38(02): 16-20 https://doi.org/10.3969/j.issn.1000-2006.2014.02.004

References

[1] 林兰英,傅峰.指接材研究现状与进展[J].木材工业,2007,21(4):5-8. Lin L Y, Fu F. Research status and development trends of finger-jointed lumber[J]. China Wood Industry, 2007,21(4):5-8.
[2] 林兰英,傅峰.短榫指接端压和嵌合度参数分析[J].北京林业大学学报,2008,30(2):138-142. Lin L Y, Fu F. Endpressure and fitness ratio for mini-finger jointing[J]. Journal of Beijing Forestry University, 2008,30(2):138-142.
[3] 堀江秀夫,倉田久敬.フインガジョイント材(F.J材)の强度性能[J].林産试研报,1983(72):14-16. Hideo H, Kurata Y. Properties of finger-jointed lumber[J].Report of Forest Product Research,1983(72):14-16.
[4] 堀江秀夫,倉田久敬. 构造用フインガジョイント材の强度性能[J].林産试研报,1984(73):1-34. Hideo H, Kurata Y. Properties of finger-jointed lumber[J].Report of Forest Product Research,1984(73):1-34.
[5] 堀江秀夫,倉田久敬.フインガジョイント材(F.J材)の强度性能[J].林産试研报,1982(71):1-7. Hideo H, Kurata Y. Properties of finger-jointed lumber[J].Report of Forest Product Research, 1982(71):1-7.
[6] 梁善庆,蔡智勇,王喜平,等.北美木材无损检测技术的研究与应用[J].木材工业,2008,22(3):5-8. Liang S Q, Cai Z Y, Wang X P, et al. Developments and applications of nondestructive tests for wood in north America[J]. China Wood Industry, 2008,22(3):5-8.
[7] 林兰英,傅峰.三种无损检测方法预测四种桉树木材弹性模量的对比研究[J].木材加工机械,2007,18(3):24-29. Lin L Y, Fu F. Comparative study of MOE on three methods of nondestructive test forecasting four kinds of lumber[J]. Wood Processing Machinery, 2007,18(3):24-29.
[8] 张厚江,申世杰,崔英颖,等.振动方式测定木材弹性模量[J].北京林业大学学报,2005,27(6):91-94. Zhang H J, Shen S J, Cui Y Y, et al. Measuring elastic modulus of wood using vibration method[J]. Jounal of Beijing Forestry University, 2005,27(6):91-94.
[9] 赵荣军,霍小梅,张黎.利用近红外光谱技术预测粗皮桉木材弹性模量[J].光谱学与光谱分析,2009(9):2392-2395. Zhao R J, Huo X M, Zhang L. Estimation of modulus of elasticity of eucalyptus pellita wood by near infrared spectroscopy[J]. Spectroscopy and Spectral Analysis, 2009(9):2392-2395.
[10] Tabiei A, Wu J.Three-dimensional nonlinear orthotropic finite element material model for wood[J]. Composite Structures, 2000,50:143-149.
[11] Moses D M, Prion H G L. Stress and failure analysis of wood composites: a new model[J].Composites: Part B, 2004, 35: 251-261.
[12] Serrano E. A numerical study of the shear-strength-predicting capabilities of test specimens for wood adhesive bonds[J]. International Journal of Adhesion & Adhesives, 2004, 24: 23-35.
[13] Davalos J F, Kim Y Ch. A layerwise beam element for analysis of frames with laminated sections and flexible joints[J].Finite Elements in Analysis and Design,1995, 19: 181-194.
[14] Jas Maff, Notification No.590. Finger Jointed Structural Lumber for Wood Frame Platform Construction[S].Japan:Japan Plywood Inspection Corporation.
[15] 何盛. 樟子松指接材有限元模型分析研究[D].南京:南京林业大学,2011. He S. Study of finite element modeling analysis for Pinus sylvestris L. var. mongolica Litv. finger-jointed lumber[D]. Nanjing: Nanjing Forestry University, 2011.
[16] 何盛,林兰英,傅峰,等. 樟子松指接材抗弯强度有限元模拟分析[J]. 林业科学, 2012,48(11):63-68. He S, Lin L Y, Fu F, et al. Finite element analysis of bending strength for Pinus sylvestris var. mongolica finger-jointed lumber[J]. Scientia Silvae Sinicae, 2012,48(11):63-68.
PDF(1639941 KB)

Accesses

Citation

Detail
Sections
Recommended
The full text is translated into English by AI, aiming to facilitate reading and comprehension. The core content is subject to the explanation in Chinese.

Author

Reader

Reviewer

www.nldxb.njfu.edu.cn

Edited ＆ Published by Editorial Department of Nanjing Forestry University(Natural Sciences Edition)
Address： No.159 Longpan Road,Nanjing 210037 Jiangsu,P.R.China
E-mail ：xuebao@njfu.edu.cn , xuebao@njfu.com.cn
Telephone +86-25-85428247,85427076
Distributed by China International Book Trading Corporation P.O. Box 399, Beijing ,P.R. China

/

〈 〉