Effect of low temperature on the mechanical properties of Pinus koraiensis and Populus ussuriensis timber

doi:10.3969/j.issn.1000-2006.2014.05.006

XU Huadong,XU Guoqi,WANG Lihai

JOURNAL OF NANJING FORESTRY UNIVERSITY ›› 2014, Vol. 38 ›› Issue (05) : 25-28.

PDF(1452954 KB)

JOURNAL OF NANJING FORESTRY UNIVERSITY ›› 2014, Vol. 38 ›› Issue (05) : 25-28. DOI: 10.3969/j.issn.1000-2006.2014.05.006

Effect of low temperature on the mechanical properties of Pinus koraiensis and Populus ussuriensis timber

XU Huadong,XU Guoqi,WANG Lihai^*

Author information +

History +

Abstract

Pinus koraiensis and Populus ussuriensis timber were used to study the influence of environmental temperature(especially low temperature)on the mechanical properties of wood in this paper. The wood specimens of two species were conducted a series of wood quality tests at air-dried and wet conditions. Then the modulus of elasticity(MOE), modulus of rupture(MOR)and compression strength of heartwood and sapwood were obtained and analyzed at -20 ℃, -5 ℃, 5 ℃, and 20 ℃ temperature. The results showed that temperature was one of the important factors affecting the MOE, MOR and compression strength of wood. As temperature decreased,these mechanical parameters of air-dried wood increased linearly, but for the nonlinearly increased wet wood, these parameters decreased from 20 ℃ to -5 ℃, but increased fast from -5 ℃ to -20 ℃. The mechanical properties of wet wood were more sensitive to low temperature than that of air-dried wood, which of wet wood were about 67% higher at -20 ℃ than that at 20 ℃, but the corresponding value of air-dried wood only increased about 15%.

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

XU Huadong,XU Guoqi,WANG Lihai. Effect of low temperature on the mechanical properties of Pinus koraiensis and Populus ussuriensis timber[J]. JOURNAL OF NANJING FORESTRY UNIVERSITY. 2014, 38(05): 25-28 https://doi.org/10.3969/j.issn.1000-2006.2014.05.006

References

[1] 李坚. 木材科学[M].北京:高等教育出版社, 2002.
[2] 边明明,殷亚方,宋坤霖,等.不同压缩加载速度对杉木微观结构和力学性能影响[J].建筑材料学报,2012, 15(4): 575-580.Bian M M, Yin Y F, Song K L, et al. Effect of loading rate on microstructure characteristics and mechanical properties of Chinese fir[J]. Journal of Building Materials, 2012, 15(4): 575-580.
[3] 钟永,孙华林,娄万里,等. 木节对落叶松规格材抗弯弹性模量的影响[J].建筑材料学报,2012, 15(4): 518-529.Zhong Y, Sun H L, Lou W L, et al.Effect of knots on bending modulus of elasticity of larch dimension lumber[J].Journal of Building Materials, 2012, 15(4): 518-529.
[4] 徐华东,王立海.局部缺陷对木梁动弹性模量的影响[J].建筑材料学报, 2011,69(5):653-658.Xu H D, Wang L H. Effects of local defects on the dynamic modulus of elasticity of wood beams[J].Journal of Building Materials,2011,69(5):653-658.
[5] Gerhards C C. Effects of moisture content and temperature on the mechanical properties of wood: an analysis of immediate effects[J]. Wood and Fiber Science, 1982, 14(1): 4-36.
[6] Green D W, Evans J W, Logan J D, et al. Adjusting modulus of elasticity of lumber for change in temperature[J].Forest Products Journal, 1999,49(10):82-94.
[7] 徐华东,王立海.温度和含水率对红松木材中应力波传播速度的影响[J]. 林业科学, 2011, 47(9):123-128.Xu H D, Wang L H. Effects of moisture content and temperature on propagation velocity of stress waves in korean pine wood[J]. Scientia Silvae Sinicae,2011, 47(9):123-128.
[8] 邓邵平,杨文斌,陈瑞英,等.人工林杉木木材力学性质对高温热处理条件变化的响应[J].林业科学,2009,45(12):105-111.Deng S P, Yang W B, Chen R Y, et al. Responses of main wood mechanical properties in Chinese fir plantation to different heat treatment process[J]. Scientia Silvae Sinicae,2009, 45(12): 105-111.
[9] 江京辉,吕建雄.高温热处理对木材强度影响的研究进展[J].南京林业大学学报:自然科学版. 2012, 36(2): 133-136. Jiang J H, Lyu J X. Research progress in effect of heat treatment on wood strength[J]. Journal of Nanjing Forestry University:Natural Science Edition, 2012, 36(2): 133-136.
[10] 李大纲,徐永吉,蒋本浩. 温度对意杨木材弯曲性能的影响[J].林业科技开发, 1994,8(2): 29-31.Li D G, Xu Y J, Jiang B H. Effect of temperature on bending characteristic of Italian poplar[J]. China Forestry Science and Technology, 1994,8(2): 29-31.
[11] Ayrilmis N, Buyuksari U, As N. Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperatures[J]. Cold Regions Science and Technology, 2010, 63: 40-43.
[12] 李凯夫.温度对红松弯曲特性的影响[J]. 东北林业大学学报,1988, 16(5):49-57.Li K F.Effect of temperature on bending characteristic of Pinus koraiensis[J]. Journal of Northeast Forestry University, 1988, 16(5):49-57.
[13] Bancheriau L, Bailleres H, Guitard D. Comparison between modulus of elasticity values calculated using 3 and 4 point bending tests on wooden samples[J]. Wood Science and Technology, 2002,36(3):367-383.
[14] 徐华东,王立海.冻结红松和大青杨湿木材内部水分存在状态及含量测定[J]. 林业科学, 2012, 48(2):139-143.Xu H D, Wang L H.Determining the states of water and its fraction in frozen Populus ussuriensis and Pinus koraiensis green timbers[J]. Scientia Silvae Sinicae, 2012, 48(2):139-143.
[15] 李大纲,顾炼百. 高温干燥对杨木主要力学性能的影响[J].南京林业大学学报,2000, 24(1): 35-37.Li D G, Gu L B. Effects of high temperature drying on wood properties of poplar[J]. Journal of Nanjing Forestry University, 2000, 24(1): 35-37.

PDF(1452954 KB)

Accesses

Citation

Detail

Sections

Recommended

The full text is translated into English by AI, aiming to facilitate reading and comprehension. The core content is subject to the explanation in Chinese.

www.nldxb.njfu.edu.cn

Edited ＆ Published by Editorial Department of Nanjing Forestry University(Natural Sciences Edition)
Address： No.159 Longpan Road,Nanjing 210037 Jiangsu,P.R.China
E-mail ：xuebao@njfu.edu.cn , xuebao@njfu.com.cn
Telephone +86-25-85428247,85427076
Distributed by China International Book Trading Corporation P.O. Box 399, Beijing ,P.R. China

〈

〉

Please choose a citation manager

Content to export